How to Pair ITC Sensors to AirTouch

It is an easy process to pair your ITC Sensors to AirTouch for greater temperature control and energy efficiency with your air conditioning.

AirTouch’s ITC Sensors are wireless and don’t need any extra cabling making it possible to add them onto AirTouch very quickly and in batches at once. See how easy it is easy to assign them to a zone and then pair them to your console. They are powered by a 3V CR2450 battery. Intelligent Temperature Sensor Technology with our ITC Sensors can offer greater control of your home climate with more precise temperature control and energy savings with your home air conditioning.

Intelligent Temperature Sensor Technology with ITC helps solve the problem of hot and cold spots in your home, and helps with energy savings because they give AirTouch real time feedback about temperatures in each zone, so AirTouch wont waste energy cooling or heating zones that are already at your chosen set point (comfort level).

Assign a Sensor to a Zone

To assign a wireless temperature sensor to a zone:

Start by removing the plastic cover from the sensor.

Rotate the Zone Dial to assign it to a Zone by selecting the correct zone number to correspond with the zone that you are placing the sensor in. These are in same order they are displayed on your AirTouch Home Screen. Eg, Dial Number 1 = Zone 1 (the first Zone); Dial Number 2 = Zone 2 (the second Zone) and so on. You may need a small screwdriver to help with this.

Zone Selector Dial

Zone Numbers

DialZone
Dial Number 1Zone Number 1
22
33
44
55
66
77
88
99
A10
B11
C12
D13
E14
F15
016

Pairing your ITC Sensor to AirTouch

Remove the plastic cover from the sensor.

On the AirTouch console open the Quick Menu and select System Settings > Sensors and turn Sensor Pairing from Stop to Start.

Push and hold the Pairing Button (2) for 5 seconds until the LED on the sensor turns blue (Zone On) or red (Zone Off).

The zone name will appear on the sensor page of AirTouch when the pairing is successful. Repeat this process for all sensors in the same installation.

Select Stop on the Sensors Page after pairing all sensors. The Home Screen will show both set points and temperature control for the groups which have sensors successfully assigned.

Replacing the Sensor Battery

The battery (3) used in the ITC is 3V CR2450. When the battery is low, a Low Battery icon will appear near the group name of the sensor. A good battery should last for around 1 ½ to 2 years. When the battery is flat, the group will change to % control if there is no other sensor in it. The low battery sign will disappear from the zone. The zone will then be treated as a zone without a sensor. When replacing the battery, it is a good idea to press and hold the Pairing Button (2) after removing the dead battery for 5 seconds to remove any residual charge from the circuit.

Learn more about ITC Technology with AirTouch.

Leave a Reply

Your email address will not be published.

All fields marked with * must be filled.
Please enter a valid email.
When you are building a new home there is a lot to consider when it comes to selections. Flooring, paint colours, joinery for the kitchen, blinds, style of the doors, paving, the list can seem like it just keeps going on and on.
Running software updates ensures that your AirTouch console is always operating the latest software available for it. It is important to note that you need to run software updates on the console itself, as well as on the smartphone app when they become available for it.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

© Polyaire Pty Ltd 2022