(657222) Commissioning Notes & Wiring Diagram
Specific wiring directions for blue 12V socket CN9 for the YCJ. Contact Support.
- Wire AirTouch, gateway, YCJ-A002 (supplied by Haier) and AC indoor as per diagram. Make sure all wires are connected properly.
- Set the dipswitch settings on the YCJ-A002 and the gateway as shown on the drawing as required.
- In default, AC will use its own return air sensor as control sensor. Installers can set the AC control thermistor to an AirTouch 5 sensor by going to Settings>Installer>AC Setup on the AirTouch console.