(657245) Commissioning Notes
- Wire AirTouch, gateway and AC indoor as per diagram on the left and leave the dipswitches on the gateway at their default position. Make sure all wires are connected properly.
- If AirTouch sensor is used for AC temperature control: Go to AirTouch AC settings and choose the proper sensor.
- If the gateway address is not 1, please change the S1 setting as per diagram.
Important Notes
The following models require the MHI Adaptor SC-BIKN2-E:
- SRK100ZR-W
- SRK10YL-S
- SRK10YSA-W
- SRK20ZSXA-W
- SRK50ZSXA-W
- SRK60ZHX-S
- SRK60ZIX-S
- SRK60ZJX-S
- SRK60ZMXA-S
- SRK60ZMX-S
- SRK60ZSXA-W
- SRK60ZSX-S
- SRK60ZSX-W
- SRK63HE-S1
- SRK63ZMA-S
- SRK63ZRA-W
- SRK63ZR-S
- SRK63ZSPR-S
- SRK71HE-S1
- SRK71ZK-S
- SRK71ZMA-S
- SRK71ZRA-W
- SRK71ZR-S
- SRK25ZSXA-W
- SRK35ZSXA-W
- SRK71ZR-W
- SRK71ZSPR-S
- SRK80ZMA-S
- SRK80ZRA-W
- SRK80ZR-S
- SRK80ZSPR-S
- SRK92ZMA-S
- SRK95ZRA-W